BWQQY - PRIMER SURFACER CATALYST, K201 (092187D)

  • MSDS: BWQQY
  • Manufacturer: PPG INDUSTRIES INC
  • Product Name: PRIMER SURFACER CATALYST, K201 (092187D)
  • National Stock Number: 8010-00N057444
Product Identification

Product ID:PRIMER SURFACER CATALYST, K201 (092187D)
MSDS Date:11/09/1987
FSC:8010
NIIN:00N057444
MSDS Number: BWQQY

Responsible Party
PPG INDUSTRIES INC
260 KAPPA DR
PITTSBURGH, PA 15238
US

Emergency Phone: 304-843-1300

Info Phone: 412-963-5822

Cage: 4D920

Contractor
PPG INDUSTRIES INC
ALLISON PARK, PA 15101 US

Telephone: 800-245-2590

Cage: 4D920

Ingredients

ISOCYANIC ACID, HEXAMETHYLENE ESTER, POLYMERS;

CAS: 28182-81-2

RTECS: NQ9170000

Fraction By Weight: 40%

OSHA PEL N/K

ACGIH TLV: N/K


TOLUENE (SARA 313) (CERCLA)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 10%

OSHA PEL 200 PPM

ACGIH TLV: 50 PPM, S

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


ACETIC ACID, BUTYL ESTER; (N-BUTYL ACETATE) (CERCLA)

CAS: 123-86-4

RTECS: AF7350000

Fraction By Weight: 40%

OSHA PEL 150 PPM

ACGIH TLV: 150 PPM;200 STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


ACETIC ACID, ETHYL ESTER; (ETHYL ACETATE) (CERCLA)

CAS: 141-78-6

RTECS: AH5425000

Fraction By Weight: 10%

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


HEXANE, 1,6-DIISOCYANATO-; (HEXAMETHYLENE DIISOCYANATE)

CAS: 822-06-0

RTECS: MO1740000

Fraction By Weight: <1%

OSHA PEL N/K

ACGIH TLV: 0.005 PPM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


DIZZ & LOSS OF COORD ARE INDICATIONS THAT

RTECS: 9999999ZZ


RPTD CONT. THIS PROD CONTAINS ISOCYANATES. INHAL MAY

RTECS: 9999999ZZ


ALLERGIC RESP RXNS TO THESE MATLS ARE CHARACT BY

RTECS: 9999999ZZ


SHORTNESS OF BREATH & COUGHING. THESE SYMPS MAY

RTECS: 9999999ZZ


TOLUENE APPEARS ON NAVY LIST OF OCCUP CHEM REPRO

RTECS: 9999999ZZ


PROFESSIONALS CONCERNING LATEST HAZ LIST INFO & SAFE

RTECS: 9999999ZZ


INGEST, EXCESSIVE EXPOS TO CORR MATL,

RTECS: 9999999ZZ


CONTAMS AGAINST WHICH THE RESPIRATOR IS EFFECTIVE

RTECS: 9999999ZZ


BELOW STATED LIM & TO REMOVE DECOMP PRODS DURING

RTECS: 9999999ZZ


& FULL LENGTH FACESHIELD .

RTECS: 9999999ZZ


OF NITRILE, NEOPRENE OR LATEX RUBBER

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INGEST:HARMFUL/FATAL. EYE:CAUSES
SEV IRRIT. REDNESS, ITCH, BURNING SENSATION & VISUAL DISTURBS MAY
INDICATE EXCESSIVE CONT. SKIN:CAUSES PRIMARY IRRIT. MAY BE HARMFUL
IF ABSORBED. PRLNG/RPTD CONT MAY CAUSE ALLERGIC RXN. DRYNESS,
ITCH,CRACKING, BURNING, REDNESS & SWELL ARE CNDTNS ASSOC
W/EXCESSIVE(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:CONT. INHAL:VAP & SPRAY MIST HARMFUL.
MAY CAUSE IRRIT &/OR ALLERGIC RESP RXN IN LUNGS. VAP IRRITS EYES,
NOSE & THROAT. RPTD EXPOS TO HIGH VAP CONCS MAY CAUSE IRRIT OF RESP
SYS & PERM BRAIN & NERV SYS DMG. INTENTIONAL MISUSE BY DELIB CONC
& INHAL CONTENTS CAN BE HARMFUL/FATAL. EYE WATERING, HDCHS, NAUS,
(ING 6)
Medical Cond Aggravated by Exposure:DO NOT USE IF YOU HAVE CHRONIC
(LONG-TERM) LUNG OR BREATHING PROBLEMS, OR IF YOU HAVE EVER HAD A
REACTION TO ISOCYANATES.

First Aid

First Aid:INGEST:GIVE 1-2 GLASSES OF WATER, BUT DO NOT INDUCE VOMIT.
EYE:FLUSH IMMED W/PLENTY OF WATER FOR AT LST 15 MINS. SKIN:FLUSH
IMMED W/PLENTY OF WATER FOLLOWED BY WASHING W/SOAP & WATER.
INHAL:REMOVE TO FRESH AIR. APPLY ARTF RESP & OTHER SUPPORTIVE
MEASURES AS REQD. OTHER:IF ANY OF FOLLOWING OCCUR DURING/FOLLOWING
USE OF THIS PROD, CONT POIS CTL CTR, EMER ROOM/MD IMMED; HAVE MSDS
INFO AVAIL: (ING 12)

Fire Fighting

Flash Point Method:PMCC
Flash Point:40.0F,4.4C
Lower Limits:1.9%
Extinguishing Media:USE NFPA CLASS B EXTINGS (CARBON DIOXIDE, DRY
CHEM/UNIVERSAL AQ FILM FORMING FOAM) DESIGNED TO EXTING NFPA
CLASS(SUPDAT)
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
WATER SPRAY MAY BE INEFT. WATER SPRAY MAY BE USED TO COOL CLSD
CNTNRS TO PVNT PRESS BUILD-UP & POSS(SUPDAT)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPKS & OPEN FLAMES. CLSD CNTNRS MAY EXPLODE WHEN
EXPOS TO EXTREME HEAT. DO NOT APPLY ON HOT (SUPDAT)

Accidental Release

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
NIOSH/MSHA APPRVD RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN
AREA. REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST,
VERMICULITE/OTHER ABSOR B MATL & PLACE INTO CNTNRS FOR DISP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE >120F. STORE LG QTYS IN
BLDGS DESIGNED & PROT FOR STOR OF NFPA CLASS IB FLAMM LIQS. CNTNRS
SHOULD BE GROUNDED WHEN POURING.
Other Precautions:AVOID FREE FALL OF LIQS IN EXCESS OF A FEW INCHES. IF
THIS MATL IS PART OF MULTIPLE COMPONENT COATING SYS, READ MSDS(S)
FOR OTHER COMPONENT(S) BEFORE BLENDING AS RSLTG MIXT MAY HAVE HAZS
OF ALL OF ITS PARTS.

Exposure Controls

Respiratory Protection:WHERE OVERSPRAY IS PRESENT USE NIOSH/MSHA APPRVD
POS PRESS AIR-SUPPLIED RESP. WEAR RESP FOR WHOLE TIME OF SPRAYING &
UNTIL ALL VAPS & MISTS ARE GONE. READ RESP MFR'S INSTRUCTIONS &
LITERATURE CAREFULL Y TO DETERMINE TYPE OF AIRBORNE (ING 13)
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF INGS BELOW LOWEST SUGGESTED EXPOS LIMS, LEL(ING 14)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS(ING 15)
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . WEAR IMPERMEABLE PROT CLTHG CONTRUCTED(ING
16)
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING & SHOES.
Supplemental Safety and Health
EXTING MEDIA:IB FLAMM LIQ FIRES. FIRE FIGHT PROC:AUTOIGNIT/EXPLO WHEN
EXPOS TO EXTREME HEAT. IF WATER IS USED, FOG NOZZ ARE PREF. EXPLO
HAZ:SURFS. TOX GASES MAY FORM WHEN PROD IS CONTACTED BY FLAME/HO T
SURFS. HAZ DECOMP PROD: FUMES INCL:CARBON MONOXIDE, OXIDES OF
NITROGEN, HEXAMETHYLENE DIISOCYANATE, HYDROGEN CYANIDE.

Chemical Properties

Boiling Pt:B.P. Text:>167F,>75C
Vapor Pres:23.8
Vapor Density:HVR/AIR
Spec Gravity:0.96
Evaporation Rate & Reference:209 (BUOAC=100)
Solubility in Water:2.4%
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:65.4

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG ALKALIES, STRONG MINERAL ACIDS OR STRONG
OXIDIZING AGENTS. AVOID WATER & ALCOHOLS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING/FLAME-CUTTING ON SURFS COATED W/THIS PROD
MAY PRDCE (SUPDAT)

Disposal

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF I/A/W
FEDERAL, STATE & LOCAL ENVIRONMENTAL CONTROL REGULATIONS. EMPTY
CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF THROUGH AN APPROVED
WASTE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.